BLOG 3
Hi everybody hope your all well.
Well this is blog number 3 and today i am going to show you something i have just finished. and my next w.i.p so here goes.
Over on your right is a chaos lord on a lava base sorry about photos need to get new camera but saving up is hard at the moment got to stop buying miniatures first ha ha.
I painted the base with wild rider red from GW(which is more orange than red)and flash gitz yellow both are layer paints the yellow was very thin.
I washed the top of the base with agrax earthshade from GW.
The back of the cloak was done with abaddon black base.And the inside of the cloak i used khorne red base both from GW.All gold work was done with gehenna's gold layer paint GW.

The spine on the back and horns were done with ceramite white base colour all other bone work was done with karak stone mixed with a bit of white to lighten it.
The fur cloak was drybrushed xv-88 base colour then drybrushed on top with karak stone layer from GW.

TIPS.

1. GWbase paint is quite thick so you may need to water it down on your palette especially the white.
2. If you find that the layer paints are to thin then put some on your palette as it starts to dry up it will thicken.
3. GW paint pot lids have a tendency to keep dropping back down on your brush when using them.so instead of trying to hold them open with your hand and getting paint on them.open the lid fully and slide a pencil or similar through the hinge at the back of the bottle to keep it wedged open.
4. Always make sure the tops of the pots are fully on before shaking as i know from previous experience of cleaning paint from the floor ha ha.
5. And finally try to wipe the build up of paint from the rim of the top of the pot to stop build up and prevent the lid from closing properly

W.I.P
Here is my ork warboss i am working on so far i have primed it with Vallejo surface primer.Then gave it a coat of Vallejo Matt varnish to protect it.
I paint all my parts first now before i assemble it just because i find it so much easier to get to all the parts.Once it is painted and assembled then i would finish off with any washes that need doing but will keep you updated on this.

Well everybody thats it for this blog short but sweet ha ha.
In my next blog i will be discussing paints i.e the difference in VALLEJO' GW,ARMY PAINTER,AND P3.Also some more hobby tips.some links to hobby sites and of course w.i.p.
so thankyou for reading this any comments good or bad please leave. if you want me to talk about anything or find out some information for you on warhammer40k just ask . And if you would like to follow my bog please do it can only get better through your support.

                                                                   kindest regards jason